10mm vs 12mm

Tempered Glass in Dubai

Which Thickness Should You Choose?

Buying tempered glass in Dubai sounds simple until you reach the first question: 10mm or 12mm?
Ask three suppliers and you may get three different answers. This guide explains the difference in plain words, so you can ask better questions and compare quotes with confidence.

Quick answer

  • 10mm suits most interior partitions, bathroom dividers and standard-size panels.
  • 12mm suits taller or wider panels, glass doors and busy commercial spaces.
  • Price depends on more than thickness. Size, finish, fittings and installation all count.
  • Measure first. Tempered glass can’t be cut after it’s made.

What tempered glass is

Tempered glass is ordinary glass that has been heated and then cooled very quickly. This makes it much stronger than normal glass of the same thickness. You’ll also hear it called toughened glass or safety glass.
When it breaks, it crumbles into small, blunt pieces instead of sharp shards. That’s why it’s used in shower doors, glass doors and partitions. If you want the technical detail, there’s a good overview of tempered glass on Wikipedia.
Here’s the catch. Tempered glass can’t be cut, drilled or reshaped once it has been tempered. All the cutting, edge work and holes happen first. So your measurements need to be right from day one.

10mm tempered glass: where it fits

10mm is the usual choice for interior work. Think office partitions, meeting rooms and bathroom dividers.
It’s strong enough for normal panel sizes. It’s also lighter than 12mm, which makes handling and fitting easier.
Many frameless shower screens use glass in the 8mm to 10mm range too. Your installer should confirm the right thickness for your panel size and hinges.
Planning an office or home divider? Our glass partitions page shows the options we offer.

12mm tempered glass: where it fits

12mm is heavier and stiffer. It’s a better match when panels are tall or wide, or when the glass gets heavy use.
Think large office dividers, shopfront-style walls and doors that open and close all day.
The extra weight matters. Heavier glass needs stronger fittings, floor channels and hinges. Ask your installer to confirm that the hardware suits the glass.

10mm vs 12mm at a glance

 
Typical useInterior partitions, bathroom dividers, standard panelsTall or wide panels, doors, busy commercial areas
WeightLighter, easier to handleHeavier, needs stronger fittings
StiffnessGood for normal panel sizesStiffer, less flex on large panels
CostUsually lowerUsually higher
   
Treat this as a general guide. The right choice depends on panel size, hardware and where the glass will be used.

What affects the price of tempered glass in the UAE?

Whether you’re comparing a 10mm glass price in the UAE or a 12mm tempered glass price in Dubai, you’ll notice quotes vary. Thickness is only one reason. These also change the price:
  • Size and number of panels
  • Edge finish, holes and cut-outs
  • Clear, frosted, tinted or patterned glass
  • Hardware such as hinges, patch fittings, channels and handles
  • Installation access, for example upper floors or tight lifts
  • Quantity
Always ask whether a quote includes VAT. Our published prices are shown excluding 5% VAT.
For shower enclosures, our glass shower partitions page says standard partitions start around AED 1,500 to 2,500, and premium custom or tinted options start from AED 3,500.
Thinking about switchable glass instead? Thickness affects that price too. Our smart glass cost guide lists prices by glass thickness, and it describes 10mm as the more common choice for indoor partitions and residential bathroom dividers.

How to get an accurate quote

  1. Measure the opening (width and height) and note any uneven walls or floors.
  2. Tell the supplier where the glass will go and how it will be used.
  3. Ask which thickness they recommend, and why.
  4. Ask for a written quote that lists glass, hardware, installation and VAT separately.
  5. Confirm the glass is tempered, and ask about lead time.
Measure twice. Tempered glass can’t be trimmed later.

Check that it’s real safety glass

Safety glass rules differ from country to country. For example, the US has a published standard for glass used in doors and enclosures such as shower doors: 16 CFR 1201.
Whatever the rule, ask your supplier to confirm the glass is tempered. Most tempered glass also carries a small etched mark, so ask to see it on the panel.

Frequently asked questions

Is 12mm tempered glass always better than 10mm?
No. 12mm is stiffer and heavier, but it isn’t automatically better. For normal-size interior panels, 10mm is often enough. Heavier glass also needs stronger fittings.
Can tempered glass be cut to size on site?
No. Cutting, drilling and edge work have to be done before tempering. Cutting it afterwards can make it shatter.
Is tempered glass the same as laminated glass?
No. Tempered glass is heat-treated and breaks into small pieces. Laminated glass has a plastic layer between two sheets of glass, so the pieces stay stuck together when it breaks.

Request a Quote

We’re glad to discuss your organization’s situation. So please contact us via the details below, or enter your request.

Learn more about our data protection and privacy policies.

Download A Brochure

Discover the possibilities of switchable smart film to create multi-functional
spaces that adapt to users’ needs at the flick of a switch.

SIGN UP TO THE END.
SMART GLASS MASTER MAILING LIST

Subscribe our newsletter to receive the latest news and
exclusive offers every week. No spam

EMAIL ADDRESS

Call Now Button